Automatically Clearing Settings (Automatic Panel Reset); Automatically Canceling The Mode Screen (System Auto Reset); Automatically Conserving Energy (Low Power Mode) - Konica Minolta bizhub C451 User Manual

Hide thumbs Also See for bizhub C451:

Table of Contents

Before making copies

The following are cleared when the main power switch and sub power

switch are turned off.

Settings that have not been programmed

Jobs queued to be printed

Automatically clearing settings (automatic panel reset)

If no operation is performed for a specified length of time (even if the [Reset]

key is not pressed), settings that have not been programmed, such as the

number of copies, are cleared and return to their default settings.

This is the automatic panel reset operation.

As the factory default, the automatic panel reset operation is performed after

The length of time until the automatic panel reset operation is performed

and whether or not it is performed can be set from Utility mode. For de-

tails, refer to "System Settings" on page 11-32.

Whether or not the automatic panel reset operation is performed when

there is a change of user can be set from the Utility mode. For details, re-

fer to "System Settings" on page 11-32.

If no operation is performed for a specified length of time, the screen is au-

tomatically changed to that for the mode given priority.

This is the System Auto Reset operation.

As the factory default, the Copy mode screen is displayed after 1 minute.

The mode screen that is displayed when the System Auto Reset opera-

tion is performed can be changed from the Utility mode. For details, refer

to "System Settings" on page 11-32.

If no operation is performed for a specified length of time, the touch panel

goes off and the machine automatically enters a mode where it conserves