Konica Minolta bizhub C451 User Manual page 697

Utility mode
Parameter
Job Reset
Reminder
Even if the System Auto Reset Time is [OFF], the System Auto Reset
function is activated after 1 minute of no operation of the machine during
the User Authentication or Account Track.However, when in the Enlarge
Display mode, the System Auto Reset function is not activated.
If user authentication settings have been specified or "Enhanced Security
Mode" has been set to "ON", the logoff from Administrator mode or user
authentication mode will be performed according to the "System Auto
Reset Time" parameter.
C451
Description
When Account Select whether or not the settings are re-
is changed set (initialized) when the user has
changed.
This machine detects that the user has
changed when the optional key counter
has been removed or when the user has
logged off if user authentication or ac-
count track settings are specified.
When original Select whether or not the settings are re-
is set on ADF set when a document is loaded into the
automatic document feeder.
Next Job Staple Setting:
Select whether the same Staple setting
from the previous job is set or the setting
is canceled when that job begins and the
settings for the next job can be speci-
fied.
Original Set/Bind Direction:
Select whether the same Original Direc-
tion and Binding Position settings from
the previous job are set or the settings
are canceled when that job begins and
the settings for the next job can be spec-
ified.
Reset Data After Job:
Select whether or not to reset the ad-
dress and other settings after scanning
or fax transmission.
When "Confirm with User" is specified,
whether or not to hold the address and
other settings can be selected after
scanning or fax transmission.
11
Default Setting
Reset
Do Not Reset
OFF
OFF
Reset All
11-40