Punch Edge Sensor Adjustment - Konica Minolta bizhub C451 User Manual

Utility mode
9
Check the print result.
– Check that the angle of the punched holes was adjusted.
– If more adjustment is necessary, repeat steps 6 and 7.

Punch Edge Sensor Adjustment

The sensors for detecting the paper edges when printing with a Punch
setting can be adjusted.
Note
[Punch Edge Sensor Adjustment] appears only if optional punch kit is in-
stalled on finisher FS-517 or FS-608.
For details on the Punch settings, refer to "Punching holes in copies
(Punch settings)" on page 2-93.
1
Display the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
"Displaying the Administrator Settings screen" on page 11-56.
2
Touch [1 System Settings].
The System Settings screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [3 Finisher Adjustment].
The Finisher Adjustment screen appears.
C451
11
11-90