Additional copy operations
–
When the original is loaded into the ADF:
5
Press the [Start] key.
6
If the document was placed on the original glass, touch [Finish], and
then press the [Start] key.
–
If the document was loaded into the ADF, printing of the proof copy
begins without the screen appearing confirming that scanning of
the document is finished.
A single proof copy is printed.
7
Check the proof copy.
–
If the proof copy was printed as desired, continue with step 11.
–
To change the copy settings, continue with step 8.
8
Touch [Change Setting] in the screen that appeared when the proof
copy was printed.
C451
3
3-7