Konica Minolta bizhub C451 User Manual page 775

Utility mode
19
Touch [OK].
The maximum number of prints allowed is set.
20
To use authentication unit (biometric type) or authentication unit (IC
card type), touch [Register Auth. Info.].
– [Register Auth. Info.] appears only if an authentication unit is in-
stalled on this machine.
– For details on using the authentication unit, refer to the User's
Guide for the authentication unit.
The Register Auth. Info. screen appears.
21
Touch [Edit].
– When using authentication unit (biometric type), place a finger on
the authentication unit and register the vein patterns.
– When using authentication unit (IC card type), place an IC card on
the authentication unit and register the card information.
22
Touch [Function Permission].
The Function Permission screen appears.
23
Touch the button for the desired setting for each operation, and then
touch [OK].
– To permit the operation to be performed, touch [Allow].
– To prohibit the operation to be performed, touch [Restrict].
– Touch [All Users] to apply the settings in the current screen to all
registered users. Touch [All Users], touch [OK], and then touch [OK]
in the next screen that appears.
– With "Print Scan/Fax TX", printing can be prevented when scanning
or faxing a document saved in a box.
C451
11
11-118