Selecting A Paper Setting - Konica Minolta bizhub C451 User Manual

Hide thumbs Also See for bizhub C451:

Table of Contents

Basic copy operations

Selecting a Paper Setting

The paper size can be selected automatically according to the document

size or it can be specified manually. Specify the paper size according to the

corresponding procedure, depending on the desired copy settings.

As the factory default, "Auto" is selected.

When copying after selecting a paper tray with letterhead paper selected

as the paper type, the copy speed will be slow, even with single-sided

copying, since the paper alignment operation is performed.

If a setting for special paper is selected for a paper tray, that tray is not

selected automatically with the "Auto" Paper setting. (However, a paper

tray set to "Single Side Only" is given priority to be selected with single-

sided printing.) Be sure to specify a paper setting when special paper is

loaded into a paper tray. For details, refer to "Specifying a setting for spe-

cial paper" on page 6-21.

If the "Auto Paper Select" was selected at the "Auto Zoom" setting, the

Zoom screen appears. Touch the button for the desired zoom ratio.

The "Auto" Paper setting cannot be combined with the "Auto" Zoom Set-

For details on specifying the priority of paper trays, refer to "Specifying

user settings" on page 11-20.