Specifying Administrator Settings; System Settings - Konica Minolta bizhub C451 User Manual

Utility mode
11.4

Specifying administrator settings

This section describes the function and main registration parameters that
can be specified after pressing the [Utility/Counter] key, then touching
[Administrator Settings].

System Settings

Power Save Settings
Parameter
Low Power Mode
Settings
Sleep Mode Set-
tings
Power Save Key
Enter Power Save
Mode
Output Settings
Parameter
Print/Fax Out-
put Settings
Output Tray
Settings
Bin Assign-
ment
Shift Output
Each Job
1
* If optional separator is installed, "Tray 2" is selected as the factory default.
C451
Description
Specify the desired length of time (between 10
and 240 minutes) until the machine enters Power
Save mode.
Specify the desired length of time (between 15
and 240 minutes) until the machine enters Sleep
mode.
Select which low power mode is entered when the
[Power Save] key is pressed.
• Low Power:
The touch panel goes off and the machine
enters a mode where it conserves energy.
• Sleep:
Although the machine conserves more energy
in Sleep mode than in Power Save mode, the
machine must warm up when Sleep mode is
canceled, therefore taking more preparation
time than Power Save mode.
Specify settings for faxing. For details, refer to the
User's Guide [Fax Operations] and the User's
Guide [Network Fax Operations].
Description
Specify settings for faxing and printing. For details, refer to the User's Guide
[Fax Operations] and the User's Guide [Print Operations].
Select the finishing tray for each type of job (copies,
printouts, faxes and reports).
Select whether or not Tray 1 is specified as mailbin 5
and the optional output tray is specified as mailbin 6.
Select whether or not printed copies are fed out shifted
when "Offset" is selected while optional finisher or sep-
arator is installed.
• Yes: Pages are fed out shifted.
• No: Pages are fed out without being shifted.
11
Default Setting
15 minutes
30 minutes
Low Power
Normal
Default Setting
*1
Copy: Tray 1
*1
Printer: Tray 1
Print Reports: Tray
*2
2
*2
Fax: Tray 2
Not Set
Yes
11-32