Table of Contents
Advertisement
RFC 4605, Internet Group Management Protocol (IGMP)/Multicast Listener Discovery (MLD)-Based
•
Multicast Forwarding ("IGMP/MLD Proxying")
MLD configuration task list
Complete these tasks to configure MLD:
Task
Configuring basic functions of MLD
Adjusting MLD performance
Configuring MLD SSM mapping
Configuring MLD proxying
NOTE:
In MLD view, the configuration is globally effective. In interface view, the configuration is effective on
the current interface only.
If no configuration is performed in interface view, the global configurations performed in MLD view
will apply to that interface. Configurations performed in interface view take precedence over those
performed in MLD view.
Configuring basic functions of MLD
Configuration prerequisites
Before you configure the basic functions of MLD, complete the following tasks:
Configure any IPv6 unicast routing protocol so that all devices in the domain can be interoperable
•
at the network layer
Configure IPv6 PIM-DM or IPv6 PIM-SM
•
Determine the MLD version
•
Determine the IPv6 multicast group address and IPv6 multicast source address for static group
•
member configuration
Enabling MLD
Configuring the MLD version
Configuring static joining
Configuring an ipv6 multicast group filter
Configuring the maximum number of IPv6
multicast groups that an interface can join
Configuring MLD message options
Configuring MLD query and response
parameters
Configuring MLD fast leave processing
Enabling MLD SSM mapping
Configuring MLD SSM mappings
Enabling MLD proxying
Configuring IPv6 multicast forwarding on a
downstream interface
308
Remarks
Required
Option
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
