Ipv6 Pim-Ssm Configuration Example - HP A5500 SI Switch Series Configuration Manual

2: Vlan-interface200
# View the DF information of the IPv6 multicast forwarding table on Switch C.
[SwitchC] display multicast ipv6 forwarding-table df-info
Multicast DF information
Total 1 RP
Total 1 RP matched
00001. RP Address: 6001::1
MID: 0, Flags: 0x2100000:0
Uptime: 00:07:21
RPF interface: LoopBack0
List of 2 DF interfaces:
1: Vlan-interface102
2: Vlan-interface103
# View the DF information of the IPv6 multicast forwarding table on Switch D.
[SwitchD] display multicast ipv6 forwarding-table df-info
Multicast DF information
Total 1 RP
Total 1 RP matched
00001. RP Address: 6001::1
MID: 0, Flags: 0x2100000:0
Uptime: 00:05:12
RPF interface: Vlan-interface103
List of 2 DF interfaces:
1: Vlan-interface300
2: Vlan-interface400

IPv6 PIM-SSM configuration example

Network requirements
Receivers receive VOD information through multicast. The receiver groups of different organizations
•
form stub networks, and one or more receiver hosts exist in each stub network. The entire PIM
domain operates in the SSM mode.
Host A and Host C are IPv6 multicast receivers in two stub networks, N1 and N2.
•
Switch D connects to the network that comprises the IPv6 multicast source through VLAN-interface
•
300.
Switch A connects to N1 through VLAN-interface 100 and to Switch D and Switch E through VLAN-
•
interface 101 and VLAN-interface 102 respectively.
Switch B and Switch C connect to N2 through their respective VLAN-interface 200 and to Switch E
•
through VLAN-interface 103 and VLAN-interface 104, respectively.
Switch E connects to Switch A, Switch B, Switch C, and Switch D.
•
The SSM group range is FF3E::/64.
•
MLDv2 will run between Switch A and N1 and between Switch B/Switch C and N2.
•
400