Configuring Ipv6 Multicast Vlan Ports - HP A5500 SI Switch Series Configuration Manual

To do...
Specify the user VLAN that
comprises the current user ports
as the default VLAN
Configure the current user ports to
permit packets of the specified
IPv6 multicast VLAN to pass and
untag the packets
NOTE:
For more information about the port link-type, port hybrid pvid vlan, and port hybrid vlan
commands, see the

Configuring IPv6 multicast VLAN ports

In this approach, you configure a VLAN as an IPv6 multicast VLAN and assign user ports to it. You can
do this by either adding the user ports in the IPv6 multicast VLAN or specifying the IPv6 multicast VLAN
on the user ports. These two methods provide the same result.
Configure IPv6 multicast VLAN ports in IPv6 multicast VLAN view
Follow these steps to configure IPv6 multicast VLAN ports in IPv6 multicast VLAN view:
To do...
Enter system view
Configure the specified VLAN as
an IPv6 multicast VLAN and enter
IPv6 multicast VLAN view
Assign the ports to the IPv6
multicast VLAN
Configure IPv6 multicast VLAN ports in interface view or port group view
Follow these steps to configure IPv6 multicast VLAN ports in interface view or port group view:
To do...
Enter system view
Configure the specified VLAN
as an IPv6 multicast VLAN
and enter IPv6 multicast VLAN
view
Return to system view
Enter interface view or port
group view
Use the command...
port hybrid pvid vlan vlan-id
port hybrid vlan vlan-id-list {
tagged | untagged }
Layer 2—LAN Switching Command Reference.
Use the command...
system-view
multicast-vlan ipv6 vlan-id
port interface-list
Use this command...
system-view
multicast-vlan ipv6 vlan-id
quit
interface interface-type interface-number
port-group manual port-group-name
Remarks
Required
VLAN 1 by default
Required
By default, a hybrid port permits
only packets of VLAN 1 to pass.
284
Remarks
—
Required
No IPv6 multicast VLAN
configured by default
Required
By default, an IPv6 multicast
VLAN has no member ports.
Remarks
—
Required
Not an IPv6 multicast VLAN
by default.
—
Required
Use either command.