Ipv6 Multicast Source And User Control Policy Configuration Example - HP A5500 SI Switch Series Configuration Manual

Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):100.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port(s):total 1 port(s).
IP group(s):the following ip group(s) match to one mac group.
IP group address:FF1E::101
(::, FF1E::101):
Host port(s):total 1 port(s).
MAC group(s):
MAC group address:3333-0000-0101
Host port(s):total 1 port(s).
IPv6 multicast source and user control policy configuration
example
Network requirements
As shown in
•
and Source 2) through VLAN-interface 101 and VLAN-interface 102, respectively. It connects to the
RADIUS server through VLAN-interface 103 and to the Layer-2 switch (Switch B) through VLAN-
interface 104.
MLDv1 runs on Switch A, and MLDv1 snooping runs on Switch B. Multicast sources and hosts run
•
802.1X client.
An IPv6 multicast source control policy is configured on Switch A to block multicast flows from
•
Source 2 to FF1E::101.
An IPv6 multicast user control policy is configured on Switch B so that Host A can join or leave only
•
multicast group FF1E::101.
GE1/0/1
GE1/0/4
GE1/0/4
Figure 70, Switch A is a Layer-3 switch. It connects to IPv6 multicast sources (Source 1
(D) ( 00:01:23 )
(D)
272