Multicast Source And User Control Policy Configuration Example - HP A5500 SI Switch Series Configuration Manual

Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):100.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port(s):total 1 port.
IP group(s):the following ip group(s) match to one mac group.
IP group address:224.1.1.1
(0.0.0.0, 224.1.1.1):
Host port(s):total 1 port.
MAC group(s):
MAC group address:0100-5e01-0101
Host port(s):total 1 port.

Multicast source and user control policy configuration example

Network requirements
As shown in
•
through VLAN-interface 101 and VLAN-interface 102 respectively. It connects to the RADIUS server
through VLAN-interface 103 and to Layer-2 switch B through VLAN-interface 104.
Switch A runs IGMPv2 and Switch B runs IGMPv2 snooping. Multicast sources and hosts run
•
802.1X client.
A multicast source control policy is configured on Switch A to block multicast flows from Source 2
•
to 224.1.1.1.
A multicast user control policy is configured on Switch B so that Host A can join or leave only
•
multicast group 224.1.1.1.
GE1/0/1
GE1/0/4
GE1/0/4
Figure 18, Switch A is a Layer-3 switch. It connects to multicast sources 1 and 2 and
(D) ( 00:01:23 )
(D)
47