Mld Configuration Task List; Configuring Basic Mld Functions - HP 6125G Configuration Manual

RFC 4605, Internet Group Management Protocol (IGMP)/Multicast Listener Discovery (MLD)-Based
•
Multicast Forwarding ("IGMP/MLD Proxying")

MLD configuration task list

Task

Configuring basic MLD functions

Adjusting MLD performance
Configuring MLD SSM mapping
Configuring MLD proxying
NOTE:
In MLD view, the configuration is effective globally. In interface view, the configuration is effective on
•
only the current interface.
If no configuration is performed in interface view, the global configuration in MLD view will apply to that
•
interface. Configurations performed in interface view take precedence over those performed in MLD
view.
Configuring basic MLD functions
Before you configure basic MLD functions, complete the following tasks:
Enable IPv6 forwarding and configure an IPv6 unicast routing protocol so that all devices in the
•
domain can be interoperable at the network layer.
• Configure IPv6 PIM-DM or IPv6 PIM-SM.
Determine the MLD version.
•
Determine the IPv6 multicast group address and IPv6 multicast source address for static group
•
member configuration.
• Determine the ACL rule for IPv6 multicast group filtering.
Enabling MLD
Configuring the MLD version
Configuring static joining
Configuring an IPv6 multicast group filter
Setting the maximum number of IPv6 multicast
groups that an interface can join
Configuring Router-Alert option handling
methods
Configuring MLD query and response
parameters
Configuring MLD fast-leave processing
Enabling the MLD host tracking function
Setting the DSCP value for MLD messages
Enabling MLD SSM mapping
Configuring MLD SSM mappings
Enabling MLD proxying
Configuring IPv6 multicast forwarding on a
downstream interface
266
Remarks
Required
Option
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional