Configuring Multicast Vlan Ports - HP A5500 SI Switch Series Configuration Manual

To do...
Specify the user VLAN that
comprises the current user ports
as the default VLAN
Configure the current user ports to
permit packets of the specified
multicast VLANs to pass and
untag the packets
NOTE:
For more information about the port link-type, port hybrid pvid vlan, and port hybrid vlan
commands, see the

Configuring multicast VLAN ports

In this approach, you configure a VLAN as a multicast VLAN and assign user ports to it. You can do this
by either adding the user ports in the multicast VLAN or specifying the multicast VLAN on the user ports.
These two methods provide the same result.
Configuring multicast VLAN ports in multicast VLAN view
Follow these steps to configure multicast VLAN ports in multicast VLAN view:
To do...
Enter system view
Configure the specified VLAN as a
multicast VLAN and enter multicast
VLAN view
Assign ports to the multicast VLAN
Configuring multicast VLAN ports in interface view or port group view
Follow these steps to configure multicast VLAN ports in interface view or port group view:
To do...
Enter system view
Configure the specified VLAN as
a multicast VLAN and enter
multicast VLAN view
Return to system view
Enter interface view or port group
view
Use the command...
port hybrid pvid vlan vlan-id
port hybrid vlan vlan-id-list
untagged
Layer 2—LAN Switching Command Reference
Use the command...
system-view
multicast-vlan vlan-id
port interface-list
Use this command...
system-view
multicast-vlan vlan-id
quit
interface interface-type interface-
number
Remarks
Required
VLAN 1 by default
Required
By default, a hybrid port permits
only packets of VLAN 1 to pass.
.
Remarks
—
Required
Not a multicast VLAN by default.
—
Required
Use either command.
59
Remarks
—
Required
Not a multicast VLAN by default
Required
By default, a multicast VLAN has
no ports.