Pim-Ssm Configuration Example - HP A5500 SI Switch Series Configuration Manual

Total 1 RP
Total 1 RP matched
00001. RP Address: 1.1.1.1
MID: 0, Flags: 0x2100000:0
Uptime: 00:05:12
RPF interface: Vlan-interface103
List of 2 DF interfaces:
1: Vlan-interface300
2: Vlan-interface400

PIM-SSM configuration example

Network requirements
As shown in
•
of different organizations form stub networks, and one or more receiver hosts exist in each stub
network. The entire PIM domain operates in the SSM mode.
Host A and Host C are multicast receivers in two stub networks.
•
Switch D connects to the network that comprises the multicast source (Source) through VLAN-
•
interface 300.
Switch A connects to stub network N1 through VLAN-interface 100 and to Switch D and Switch E
•
through VLAN-interface 101 and VLAN-interface 102 respectively.
Switch B and Switch C connect to stub network N2 through their respective VLAN-interface 200
•
and to Switch E through VLAN-interface 103 and VLAN-interface 104 respectively.
Switch E connects to Switch A, Switch B, Switch C and Switch D.
•
The SSM group range is 232.1.1.0/24.
•
IGMPv3 will run between Switch A and N1 and between Switch B/Switch C and N2.
•
Figure 53, receivers receive VOD information through multicast. The receiver groups
182