Ricoh AFICIO MP C305SP Manual page 257

10. Troubleshooting
Message
"Cannot find "XXX" scanner
used for the previous scan.
"YYY" will be used instead."
("XXX" and "YYY" indicate
scanner names.)
"Cannot specify any more
scanning area."
"Clear Misfeed(s) in ADF."
"Communication error has
occurred on the network."
202
Causes
The machine is not
connected to the network
correctly.
The maximum number of
registerable scan areas has
been exceeded.
A paper misfeed has
occurred inside the ADF.
A communication error has
occurred on the network.
Solutions
• Check that the previously used
scanner is connected to the
network correctly.
• Cancel the personal firewall of
the client computer. For details
about firewall, see Windows
Help.
• Use an application such as telnet
to make sure SNMPv1 or
SNMPv2 is set as the machine's
protocol. For details about how to
check this, see "Remote
Maintenance Using telnet",
Connecting the Machine/ System
Settings .
• Select the scanner used for the
previous scan.
The maximum number of scanning
areas that can be stored is 100. Delete
unneeded scanning areas.
• Remove jammed originals, and
then insert them again. For details
about how to remove jammed
paper, see "Removing Jammed
Paper", Troubleshooting
• When a misfeed occurs, replace
the jammed originals.
• Check whether the originals are
suitable to be scanned by the
machine.
Check whether the client computer can
use the TCP/IP protocol.
.