Ricoh AFICIO MP C305SP Manual page 238

Message
"Insufficient Memory"
"Memory Retrieval Error"
"No response from the
server. Authentication has
failed."
"Output tray has been
changed."
Causes
A memory allocation error
occurred.
A memory allocation error
occurred.
A timeout occurred while
connecting to the server for
LDAP Authentication or
Windows Authentication.
The output tray was
changed because the paper
size of the specified output
tray is limited.
When Messages Are Displayed on the Control Panel
Solutions
PCL 5c
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver Help.
PCL 6
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver Help.
On the printer driver's [Detailed
Settings] tab, click [Print Quality]
in "Menu:", and then select
[Raster] in the "Vector/Raster:"
list. In some cases, it will take a
long time to complete a print job.
PostScript 3
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver Help.
Turn off the main power switch, and
then back on again. If the message
appears again, replace the RAM. For
details about replacing the RAM,
contact your service representative.
Check the status of the server.
Specify the proper output tray.
183