Installing The Key Counter (Option) - Olivetti d-copia 1800 Service Manual

1-2-3

Installing the key counter (option)

Installing the key counter requires the following component:
Key counter (P/N AVGR03671G)
Key counter set (P/N AVGR08516B)
Key counter wire set
Key counter mounting plate (P/N AVGR00804W)
Supplied parts of key counter set:
Key counter socket assembly (P/N 127233J)
Key counter cover
Key counter mount
Key counter retainer
Key counter cover retainer
Two (2) Edgings
One (1) Band
One (1) M3 8 tap-tight P screw
Two (2) M4 10 tap-tight P screws
Two (2) M4 10 tap-tight S screws
Two (2) M3 6 bronze flat-head screws
One (1) M4 20 tap-tight S screw
One (1) M3 bronze nut
One (1) M3 8 bronze binding screw
One (1) M4 30 tap-tight S screw
Five (5) M4 6 chrome TP screws
Two (2) M4 10 chrome TP screws
Supplied parts of key counter wire set:
Key counter wire (P/N AVGR11503G)
Two (2) Wire saddles
One (1) Edging
Procedure
1. Turn the main power switch off and unplug
the power cable from the wall outlet.
2. Fit the key counter socket assembly to the
key counter retainer using two screws and
nut.
3. Fit the key counter mount to the key counter
cover using two screws.
4. Fit the key counter retainer to the key
counter mount using two screws.
Y110980-1
Key counter retainer
M4 x 6 screw
M3 nut
M4 x 6 screw
Key counter
socket assembly
M3 x 6 flat-head
(P/N 127233J)
screws
Service Manual
M4 x 6 screw
Key counter
mount
M4 x 6 screw
Key counter cover
Figure 1-2-13
2KL/2KK
1-2-11