Contents Of The Mounting Kits; Pole Mount Kit - Cisco ASR 901S Series Installation Manual

Installing the Router
Do not locate the antenna near overhead power lines or other electric light or power circuits, or where it
Warning
can come into contact with such circuits. When installing the antenna, take extreme care not to come into
contact with such circuits, as they may cause serious injury or death. For proper installation and grounding
of the antenna, please refer to national and local codes (for example, U.S.:NFPA 70, National Electrical
Code, Article 810, Canada: Canadian Electrical Code, Section 54). Statement 1052

Contents of the Mounting Kits

This section describes the contents of the mounting kits available for the router and when you should use each
kit.

Pole Mount Kit

Use the Cisco pole mount kit to install the pole clamp bracket onto any pole or streetlight. The kit supports
poles that meet the following criteria:
• Size: 2 to 16 inch diameter poles
OL-29732-01
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide

Contents of the Mounting Kits

25