Installing The Router; Mounting Kits Overview; Chapter - Cisco ASR 901S Series Installation Manual

Installing the Router

This chapter describes the safety information, equipment, and procedures required to mount the Cisco ASR
901S Series Aggregation Services Router onto a vertical pole or wall. This chapter contains these sections:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Mounting Kits Overview

You will need some or all of the kits described in this section to install the router in the outside plant (OSP).
Your installation environment and requirements determine the kits you need.
The includes a detailed description of each kit.
OL-29732-01
Mounting Kits Overview, page 23
General Safety Information for Mounting, page 24
Contents of the Mounting Kits, page 25
Customer-Supplied Materials and Tools, page 30
Router-Mounting Instructions, page 31
Connecting the Chassis Ground and Power, page 45
Opening the Router Chassis, page 48
Power Connection Compliance, page 52
Assembling and Connecting the DC Power Cable to the Router, page 52
AC Power Cable, page 55
Connecting the AC Power Cable to the Router, page 56
Connecting Cables, page 57
Enabling Zero Touch Provisioning on the Router, page 67
Accessing the Router in Freezing Temperature, page 69
Powering on the Router, page 69
Using CLIs for Flash Memory and Directory Procedures, page 70
What to do After Installing the Hardware, page 74
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
3
C H A P T E R
23