Cisco ASR 901S Series Installation Manual page 53

Installing the Router
Step 2 Use four customer-supplied screws and optional screw anchors to attach the wall mount bracket to the mounting
surface.
Note
Step 3 Hold the router inside the wall mount bracket such that the four bolts on each side of the router are aligned
with the four holes the on each side of the wall mount bracket (see the following figure).
Figure 22: Mounting the Router onto the Wall Mount Bracket on the Wall
1
2
OL-29732-01
If necessary, use suitable screw anchors and an exterior-grade plywood backboard to mount the router
to a stucco, cement, or dry wall.
M8 x 12 screws
M8 spring washers
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
Mounting the Router onto a Wall
3 Wall mount bracket
—
43