Ac Power Cable - Cisco ASR 901S Series Installation Manual

Installing the Router

AC Power Cable

The router supports the Cisco AC power cable that needs to be ordered separately. One end of the cable has
the router AC power connector; the other end is attached to an AC power plug.
Ensure that the power source is OFF before connecting or disconnecting the power cord wires from the
Caution
power source.
To attach the appropriate connector the AC power cable, follow the manual or other instructions provided
Caution
by the electrical equipment vendor, ensuring that you comply with the electrical codes for your installation
location.
Figure 32: Three-Pin AC Power Connector
1 , 13
2, 11
3, 2
4
5
To connect the AC power cable to the router, see
56.
OL-29732-01
Neutral 6
Ground 7
Hot 8
AC plug, NEMA 5-15 9
Cable 10
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
Wrap label
Overmold
Coupling nut
Contact socket
Insulator
Connecting the AC Power Cable to the Router, on page

AC Power Cable

55