Mounting The Router Onto A Wall - Cisco ASR 901S Series Installation Manual

Installing the Router
Any reinforcement hardware you provide should be mounted to the wall with the correct distance apart so
when the bolts are installed through the mounting bracket wall mount holes (Item 1, in the following figure),
they will align with the holes in the wall.
Figure 20: Distance for Wall-Mounting Hardware
1

Mounting the Router onto a Wall

You can use the wall mount bracket as a template to mark the positions of the mounting holes for your
installation. You then install the wall mount bracket, and attach the router when you are ready. The following
section lists the material that you will need to mount the router onto a wall.
Materials Required
• Ground lug and screws (provided with the router)
• Crimping tool for ground lug, Panduit (http://onlinecatalog.panduit.com)
• Eight M8 or 5/16 in. screws
OL-29732-01
Use this hole for hanging the bracket to allow
hands-free install
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
Mounting the Router onto a Wall
2 These holes can be used but a 5" tall space must
be used to offset bracket from the wall
41