General Safety Information For Mounting; Contents Of The Mounting Kits; Pole Mount Kit - Cisco 1240 Hardware Installation Manual

General Safety Information for Mounting

D E C . 2 0 1 1 — E F T R E V I E W D R A F T — C I S C O C O N F I D E N T I A L
General Safety Information for Mounting
Before performing any of the tasks in this chapter, read the safety warnings in this section and in the
Installation Safety and Site Preparation
One person is required to properly and safely mount the router.
Caution All mounting methods at any location are subject to the acceptance of local jurisdiction.
The mounting surface, attaching screws, and optional wall anchors must be able to support a
Caution
50 pound (22.7 kg) static weight.
Personnel mounting the router must understand grounding methods.
Caution
Do not locate the antenna near overhead power lines or other electric light or power circuits, or
Warning
where it can come into contact with such circuits. When installing the antenna, take extreme care
not to come into contact with such circuits, as they may cause serious injury or death. For proper
installation and grounding of the antenna, please refer to national and local codes (for example,
U.S.:NFPA 70, National Electrical Code, Article 810, Canada: Canadian Electrical Code, Section 54).
Statement 1052

Contents of the Mounting Kits

This section describes the contents of the mounting kits available for the router and when you should
use each kit.

Pole Mount Kit

When to Use
Use the Cisco pole mount kit to install the mounting plate on any pole or streetlight. The kit supports
poles that meet the following criteria:
•
•
Item
1
2
3
4
Cisco 1240 Connected Grid Router Hardware Installation Guide
4-2
Size—2 to 16 inch diameter poles
Material—Metal, wood, or fiberglass poles
Description
Mounting plate (18.03 x 23.11 x 5.48 cm)
Clamp brackets (17.32 x 4.31 x 3.42 cm)
M8 x 4.25 hex nut
M8 x 4.25 split lock washer
chapter.
Item Description
5 M8 x 4.25 washer
6 3/8-in. carriage bolt, 7 in. (10.2 cm) length
Chapter 4 Mounting the Router
OL-12345-01