Cisco ASR 901S Series Installation Manual page 43

Installing the Router
Procedure
Step 1 Position the pole clamp gussets on the pole clamp bracket for the pole diameter you are using and secure each
pole clamp gusset with two M8 x 12 screws (with M8 spring washers). Tighten the screws to 13 to 15 ft lbs
(17.6 to 20.3 Nm). (See the following figure.)
Figure 14: Assembling the Pole Clamp Gusset onto the Pole Clamp Bracket
1
2
OL-29732-01
M8 x 12 screw (with M8 spring washer)
M8 spring washer
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
Assembling the Pole Clamp Bracket and the Pole Clamp Gusset
3 Pole clamp gusset
4 Pole clamp bracket
33