Cisco ASR 901S Series Installation Manual page 76

Connecting Network Cables
Note
Figure 42: View of Only SFP Cable Connected to the SFP Port Connector on the ASR 901S Router
Step 5 Connect the other end of the external IP65 SFP cable to the patch or demarcation panel at your site.
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
66
The SFPs supported on the Cisco ASR 901S Series Aggregation Services Router is dependent on
the router chassis model. For the list of SFPs supported on the router, see
Supported, on page 81.
Installing the Router
Table 6: SFP Modules
OL-29732-01