IBM System x3650 M4 BD Type 5466 Installation And Service Manual page 92

5. Connect the power cord for the new power supply to the power-cord connector
6. Route the power cord through the cable retainer clip so that it does not
Figure 61. Power cord
7. Connect the power cord to a properly grounded electrical outlet.
8. Make sure that the ac power LED and the dc power LED on the power supply
9. If you are adding a power supply to the server, attach the redundant power
Figure 62. Power information label
76
System x3650 M4 BD Type 5466: Installation and Service Guide
on the power supply.
accidentally become disconnected.
are lit, indicating that the power supply is operating correctly.
information label that comes with this option on the server top cover near the
power supplies.