IBM System x3650 M4 BD Type 5466 Installation And Service Manual page 260

There are two types of microprocessor installation tools. The tools are similar in
function and design, however Tool A has one setting for installing one size of
microprocessor, and supports the following families of microprocessors: E5-26xx,
E5-46xx. Installation Tool B has two settings for installing two different sizes of
microprocessors. The settings that are marked on Tool B are "L" for smaller low
core microprocessors, and "H" for larger high core microprocessors. Installation
Tool B supports the following families of microprocessors: E5-26xx, E5-46xx,
E5-26xx v2, E5-46xx v2.
Microprocessor Installation Tools A and B are shown in the following illustration.
Figure 166. Microprocessor installation tools
To install a microprocessor and heat sink, complete the following steps:
Procedure
244
System x3650 M4 BD Type 5466: Installation and Service Guide
Cover
Microprocessor Installation Tool A
1. Read the safety information that begins on page "Safety" on page vii and
"Installation guidelines" on page 32.
2. Open the microprocessor socket release levers and retainer:
Installation tool
Microprocessor
Microprocessor Installation Tool B
Installation tool
Microprocessor