Table of Contents
Advertisement
800b010a-1e83ffff
Redundancy Lost for [RedundancySetElementName] has asserted. (Cooling Zone 3)
Explanation: This message is for the use case when Redundancy Lost has asserted.
May also be shown as 800b010a1e83ffff or 0x800b010a1e83ffff
Severity: Error
Alert Category: Critical - Fan Failure
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0802
SNMP Trap ID: 11
Automatically notify Support: No
User response:
1.
Make sure that the connectors on fan n are not damaged.
2.
Make sure that the fan n connectors on the system board are not damaged.
3.
Make sure that the fans are correctly installed.
4.
Reseat the fans.
5.
Replace the fans. (n = fan number)
800b010a-1e84ffff
Redundancy Lost for [RedundancySetElementName] has asserted. (Cooling Zone 4)
Explanation: This message is for the use case when Redundancy Lost has asserted.
May also be shown as 800b010a1e84ffff or 0x800b010a1e84ffff
Severity: Error
Alert Category: Critical - Fan Failure
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0802
SNMP Trap ID: 11
Automatically notify Support: No
User response:
1.
Make sure that the connectors on fan n are not damaged.
2.
Make sure that the fan n connectors on the system board are not damaged.
3.
Make sure that the fans are correctly installed.
4.
Reseat the fans.
5.
Replace the fans. (n = fan number)
800b010a-1e83ffff • 800b010a-1e84ffff
Appendix A. Integrated management module II (IMM2) error messages
355
Advertisement
Table of Contents
Troubleshooting
