Table of Contents
Advertisement
I.1800B • I.1800E
I.1800B
[I.1800B] A cache size mismatch has been detected for one or more processor packages.
Explanation: Processors have one or more cache levels with mismatched size
Severity: Error
User response: Complete the following steps:
1.
Verify that matching processors are installed in the correct processor sockets according to the service information
for this product. Correct any mismatch found.
2.
Check IBM support site for an applicable service bulletin or firmware update that applies to this Processor error.
3.
(Trained Service technician only) Inspect Processor socket and replace the system board first if socket is
damaged.
I.1800C
[I.1800C] A cache type mismatch has been detected for one or more processor packages.
Explanation: Processors have one or more cache levels with mismatched type
Severity: Error
User response: Complete the following steps:
1.
Verify that matching Processors are installed in the correct Processor sockets according to the service information
for this product. Correct any mismatch found.
2.
Check IBM support site for an applicable service bulletin or firmware update that applies to this Processor error.
3.
(Trained Service technician only) Inspect Processor socket and replace the system board first if socket is
damaged.
I.1800D
[I.1800D] A cache associativity mismatch has been detected for one or more processor packages.
Explanation: Processors have one or more cache levels with mismatched associativity
Severity: Error
User response: Complete the following steps:
1.
Verify that matching Processors are installed in the correct Processor sockets according to the service information
for this product. Correct any mismatch found.
2.
Check IBM support site for an applicable service bulletin or firmware update that applies to this Processor error.
3.
(Trained Service technician only) Inspect Processor socket and replace the system board first if socket is
damaged.
I.1800E
[I.1800E] A processor model mismatch has been detected for one or more processor packages.
Explanation: Processors have mismatched Model Number
Severity: Error
User response: Complete the following steps:
1.
Verify that matching Processors are installed in the correct Processor sockets according to the service information
for this product. Correct any mismatch found.
2.
Check IBM support site for an applicable service bulletin or firmware update that applies to this Processor error.
3.
(Trained Service technician only) Inspect Processor socket and replace the system board first if socket is
damaged.
594
System x3650 M4 BD Type 5466: Installation and Service Guide
Advertisement
Table of Contents
Troubleshooting
