IBM System x3650 M4 BD Type 5466 Installation And Service Manual page 85

c. Align the installation tool with the microprocessor socket. The installation
tool rests flush on the socket only if properly aligned.
Figure 50. Installation tool alignment
d. Install the microprocessor using the following instructions for your
installation tool.
v If using Installation Tool A, twist the handle on the microprocessor tool
assembly counterclockwise to the open position to insert the
microprocessor into the socket, and lift the installation tool out of the
socket.
v If using Installation Tool B, twist the handle of the installation tool
assembly counterclockwise until the microprocessor is inserted into the
socket, and lift the installation tool out of the socket. The following
illustration shows the tool handle in the open position.
Figure 51. Installation tool handle adjustment
Chapter 2. Installing optional devices
69