IBM System x3650 M4 BD Type 5466 Installation And Service Manual page 364

80070214-2201ffff • 80070219-0701ffff
80070214-2201ffff Sensor [SensorElementName] has transitioned to critical from a less severe state. (TPM Lock)
Explanation: This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.
May also be shown as 800702142201ffff or 0x800702142201ffff
Severity: Error
Alert Category: Critical - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0522
SNMP Trap ID:
Automatically notify Support: No
User response:
1. Update the server firmware (see Recovering the server firmware).
2. If the problem persists, (trained technician only) replace the system board (see Removing the system board and
Installing the system board).
80070219-0701ffff Sensor [SensorElementName] has transitioned to critical from a less severe state. (SysBrd
Fault)
Explanation: This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.
May also be shown as 800702190701ffff or 0x800702190701ffff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0522
SNMP Trap ID: 50
Automatically notify Support: No
User response:
1. Check for an error LED on the system board.
2.
Check the system-event log.
3. Check for the system firmware version and update to the latest version. Important: Some cluster solutions
require specific code levels or coordinated code updates. If the device is part of a cluster solution, verify that the
latest level of code is supported for the cluster solution before you update the code.
4. Replace any failing device which indicated from system event log.
5. If problems still occurred, (trained technician only) replace the system board.
348
System x3650 M4 BD Type 5466: Installation and Service Guide