IBM System x3650 M4 BD Type 5466 Installation And Service Manual page 297

40000019-00000000 LAN: Ethernet[[arg1]] interface is now active.
Explanation: This message is for the use case where a Management Controller ethernet interface is now active.
May also be shown as 4000001900000000 or 0x4000001900000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0025
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
4000001a-00000000 DHCP setting changed to [arg1] by user [arg2].
Explanation: This message is for the use case where a user changes the DHCP setting.
May also be shown as 4000001a00000000 or 0x4000001a00000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0026
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
4000001b-00000000 Management Controller [arg1]: Configuration restored from a file by user [arg2].
Explanation: This message is for the use case where a user restores a Management Controller configuration from a
file.
May also be shown as 4000001b00000000 or 0x4000001b00000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0027
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000019-00000000 • 4000001b-00000000
Appendix A. Integrated management module II (IMM2) error messages
281