Kyocera TASKalfa 2552ci Operation Manual page 421

Setup and Registration (System Menu) > System Menu
Item
Color Setting
Gloss Mode
EcoPrint
Toner Save Level (EcoPrint) Select the default Toner Save Level (EcoPrint).
Override A4/Letter
Duplex
Copies
Orientation
Form Feed TimeOut
LF Action
CR Action
You can choose whether reports are printed in color or black and white.
Value: Color, Black & White
Gloss Mode increases the effect of glossiness in printing. However, printing takes
longer time.
Value: Off, On
IMPORTANT
This function is not available when [Labels] or [Transparency] is selected as
the paper type setting.
Cassette/MP Tray Settings (page 8-7)
Depending on the paper used, printing in gloss mode may cause curl in paper. To
reduce curl, try using thicker paper.
EcoPrint conserves toner when printing. This is recommended for test copies where
faded printing is not a problem.
Value: Off, On
Value: 1 (Low) to 5 (High)
NOTE
Raising the level reduces toner consumption, but image quality falls.
Select whether to treat A4 size and Letter, which are similar in size, as the same size
when printing.
Value
Off: A4 and Letter are not regarded as the same in size.
On: A4 and Letter are regarded as the same in size. The machine will use
whichever size is in the paper source.
Select binding orientation for duplex mode.
Value: 1-sided, 2-sided Bind LongEdge, 2-sided Bind ShortEdge
Set the default number of copies, from 1 to 999.
Value: 1 to 999 copies
Set the default orientation, [Portrait] or [Landscape].
Value: Portrait, Landscape
Receiving print data from the computer, the machine may sometimes wait if there is
no information signaling that the last page does not have any more data to be printed.
When the preset timeout passes, the machine automatically prints paper. The options
are between 5 and 495 seconds.
Value: 5 to 495 seconds (in 5 second increments)
Set the line feed action when the machine receives the line feed code (character
code 0AH).
Value: LF Only, LF and CR, Ignore LF
Set the character return action when the machine receives the character return code
(character code 0DH).
Value: CR Only, LF and CR, Ignore CR
8-41
Description