Kyocera TASKalfa 2552ci Operation Manual page 540

Hide thumbs Also See for TASKalfa 2552ci:

Table of Contents

Troubleshooting > Troubleshooting

Images are skewed.

Printouts have vertical

Dirt on the top edge or

back of the paper.

Part of the image is

periodically faint or shows

white lines.

Print on the back of the

sheet is visible on the

Are the originals placed correctly?

Is the paper loaded correctly?

Is the slit glass dirty?

Is the interior of the machine dirty?

Corrective Actions

When placing originals on the platen,

align them with the original size

indicator plates.

When placing originals in the

document processor, align the

original width guides securely before

placing the originals.

Check the position of the paper

width guides.

Clean the slit glass.

Run [Laser Scanner Cleaning].

Open the right cover. If the machine

interior is dirty with toner, clean it

using soft, dry, lint-free cloth.

Open and then close the right cover. ―

Run [Drum Refresh].

Run [Developer Refresh].

Set [Prevent Bleed-through] to

Troubleshooting