Protocol Settings - Kyocera TASKalfa 2552ci Operation Manual

Setup and Registration (System Menu) > System Menu
Bonjour
[System Menu/Counter] key > [System/Network] > [Network] > [Bonjour]
Item
Bonjour
Wi-Fi Direct
Wi-Fi
Wired Network
IPSec
[System Menu/Counter] key > [System/Network] > [Network] > [IPSec]
Item
IPSec

Protocol Settings

[System Menu/Counter] key > [System/Network] > [Network] > [Protocol Settings]
Configure protocol settings.
Item
SMTP (E-mail TX)
POP3 (E-mail RX)
FTP Client (Transmission)
FTP Server (Reception)
Wi-Fi Direct
Wi-Fi
Wired Network
SMB Client (Transmission):
NetBEUI
Wi-Fi Direct
Wi-Fi
Wired Network
Select whether to use Bonjour.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
Select whether to use IPSec.
Value: Off, On
Select whether to send E-mail using SMTP.
Value: Off, On
Select whether to receive E-mail using POP3.
Value: Off, On
Select whether to send documents using FTP. To use the FTP Client, set the protocol
to [On]. The default port number is 21.
Value: Off, On
Select whether to receive documents using FTP.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
Select whether to send documents using SMB. To use the SMB Client, set the
protocol to [On]. The default port number is 445.
Value: Off, On
Selects whether to receive documents using NetBEUI.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
8-55
Description
Description
Description
*1
*1