Table of Contents
Advertisement
CHASSIS
Lift Lever Assembly
Removal
1.
Remove the center access plate. Remove the pin
clip and clevis pin retaining the two lift strap links
to the lift lever (Figure 58).
Figure 58
2.
Remove the two retaining rings that are located on
each side of the lift lever assembly (Figure 59).
Figure 59
2 - 18
3.
Slide the right and left flange bearings inward from
the pivot linkage brackets, so you will have
enough clearance to remove the lift lever
assembly (Figure 60).
4.
Remove the lift lever assembly from the pivot
linkage brackets (Figure 61).
MVC-804F
Assembly
MVC-806F
Reverse the order of removal.
Figure 60
Figure 61
400XT Series Tractor Service Manual
MVC-807F
MVC-809F
Advertisement
Table of Contents
