Hood Removal; Seat And Fender Removal - Toro 400XT Series Service Manual

Hood Removal

1. Disconnect the headlight wiring harness at the
plug and jack connection (Figure 46).
Figure 46
2. On 2003 model units, remove the rubber O-ring,
located on the left side hinge bracket, and raise
the hood. Slide the hood to the left and off the
hinge brackets. (Figure 47).
Figure 47
400XT Series Tractor Service Manual
3. On 2004 and later model units, raise the hood in
the full up position, then bring the hood back
slightly and slide the hood toward the left side of
the tractor (Figure 48).
MVC-003
4. Reinstall the hood in reverse order.

Seat and Fender Removal

1. Unplug the seat switch, and the KeyChoice™
Reverse operating switch (Figure 49).
MVC-018
2. To make it easier to remove the fasteners for the
fender assembly, jack the tractor up in the rear
and remove both rear tires.
CHASSIS
Figure 48
Figure 49
MVC-015
MVC-865F
2 - 15