Attachment Lift Lever - Toro Wheel Horse 78370 Operator's Manual

Attachment Lift Lever

The attachment lift lever (Fig. 25 & 26) is used to
raise and lower various attachments.
Raising Attachments
1. Start the tractor.
2. Pull the attachment lift lever upward until the
latch locks. In this position, the lift will hold the
attachment in the up, or raised position.
POTENTIAL HAZARD
When the engine is off, attachments in the
raised position can gradually lower.
WHAT CAN HAPPEN
Someone nearby may be pinned or injured
by the attachment as it lowers.
HOW TO AVOID THE HAZARD
Always lower the attachment lift each time
you shut off the tractor.
Lowering Attachments
1. Start the tractor.
2. Push the attachment lift lever downward to
lower the attachment.
Figure 25
1. Attachment lift lever
Figure 26
1. Raise attachment
Operation
1
m–3258
1
2
m–3315
2. Lower attachment
15