HYDRO-GEAR TRANSAXLE
7.
Install the cruise control bracket, with magnet, with
two bolts and nuts (Figure 136).
Figure 136
8.
Reconnect the wire connector for the magnet
(Figure 137).
Figure 137
3 - 6
9.
Install the brake arm with the brake spring, on the
brake stud. Install the castle nut, but do not install
the cotter pin until brake adjustment has been
performed (Figure 138). Refer to "Brake
Adjustment" on page 3 - 9.
MVC-065
10. Connect the free wheeling valve rod and vent
hose clamp (Figure 139).
MVC-064
Figure 138
Figure 139
400XT Series Tractor Service Manual
MVC-063
MVC-060