Operation; Using The Side Discharge; Operating The Power Take Off (Pto); Operating The Attachment Lift Lever - Toro Wheel Horse 78345 Operator's Manual

42" mower
Hide thumbs Also See for Wheel Horse 78345:
Table of Contents

Advertisement

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.

Using the Side Discharge

Warning
An uncovered discharge opening could allow the
lawn mower to throw objects in the operator's or
bystander's direction and result in serious injury.
Also, contact with the blade could occur.
Never remove the grass deflector from the
mower because the grass deflector routes
material down toward the turf. If the grass
deflector is ever damaged, replace it
immediately.
Never put your hands or feet under the mower.
Never try to clear discharge area or mower
blades unless you move the power take off
(PTO) to Off and rotate the ignition key to Off.
Also remove the key and pull the wire off the
spark plug(s).
1. The mower has a hinged grass deflector that disperses
clippings to the side and down toward the turf.
Operating the
Power Take Off (PTO)
The power take off (PTO) engages and disengages power to
the electric clutch.
The PTO light, in the Indicator Module, will be on when
the ignition key is in run or lights position and the power
take off (PTO) is engaged. When this light is on it is a
reminder the starter will not crank and to turn the off PTO
before getting off the tractor.
Engaging the Power Take Off (PTO)
1. Move throttle to fast position.
2. Pull the power take off (PTO) to on (Fig. 12).
1
1. PTO—Off
Disengaging the Power Take Off (PTO)
1. Push the power take off (PTO) to off (Fig. 12).
Operating the Attachment Lift
Lever
The attachment lift lever (Fig. 13) is used to raise and lower
various attachments.
Raising an Attachment
1. Depress the clutch and brake pedals to stop the
machine.
2. Pull attachment lift lever rearward until latch locks. In
this position the lift will hold the attachment in the up,
or raised position.
Lowering an Attachment
1. Depress the clutch and brake pedals to stop the
machine.
2. Pull attachment lift lever rearward, to release lift
pressure, and push the button on top to release the latch.
Move lift lever forward to lower attachment.
10
2
Figure 12
2. PTO—On
m–4201

Advertisement

Table of Contents
loading

Table of Contents