General Specifications - Toro 400XT Series Service Manual

SPECIFICATIONS

General Specifications

Item
Engines
RPM Setting, All Models
Construction
Fuel Capacity
Wheel Base
Overall Length
Overall Width
Weight
Traction System
Ground Speed
Steering
Tires
Tire Pressure
Attachment Drive
Electrical System
1 - 2
16 H.P. Kohler OHV Command Single Cylinder
17 H.P. Kawasaki OHV Twin Cylinder
19 H.P. Kawasaki OHV Twin Cylinder
For more information on servicing the engines, contact either Briggs & Stratton or
Kawasaki.
High RPM Setting (no load) – 3250 + or -100 RPM
Frame: 2" X 2" X 1/4" Welded Angle Frame
3.9 Gallons (14.7 liter)
49.5" (125.7cm)
71.0' (180.3cm)
35.5" (90.1cm) without the mower
416XT net weight 530 lbs. (240.4kg)
417XT net weight 560 lbs. (254kg)
419XT net weight 580 lbs. (263kg)
Hydro-Gear Transaxle model 330-3000
Forward - Infinite 0 to 6.8 MPH 90 (10.9 km/hr)
Reverse - Infinite 0 to 3.2 MPH (0 - 4.8 km/hr)
Four (4) position tilt wheel
Turning Radius: 16" (40.6cm) RH and LH
Front: 16 X 6.50 - 8 Super Turf Tread
Rear: 23 X 10.50 - 12 Super Turf Tread
Front Tires 20 p.s.i (138 kpa)
Rear Tires 20 p.s.i. (138 kpa)
Electric Clutch, Maintenance Free, No Adjustments
416XT: 15 amp Regulated DC Charging System
Battery Voltage - 12 volt negative ground
Battery Type: BCI Group U1, 260 CCA
417XT: 13 amp Regulated DC Charging
Battery Voltage - 12 volt negative ground
Battery Type: BCI Group U1, 340 CCA
417XT: 13 amp Regulated DC Charging
Battery Voltage – 12 volt negative ground
Battery Type: BCI Group U1, 340 CCA
25 amp, Charge Circuit
30 amp, Main Circuit
10 amp, Light Circuit
10 amp, Dash Circuit
Specification
400XT Series Tractor Service Manual