Table of Contents
Advertisement
4.4.2.
Inserting a Micro SD Card
You can optionally insert a micro SD card to the card slot on the camera module for recording videos.
1.
Remove the Sunshield from the camera. Loosen the set screw on the Sunshield using the
provided Thinner Hexagon Wrench. Slide the Sunshield out from the rail on the camera body.
2.
Rotate and then remove the camera cover, and insert a micro SD card into the card slot.
Note: After opening the camera cover for inserting the micro SD card, you have to
close the cover immediately in case of reducing the absorption capacity of the
desiccant bag inside the camera.
3.
Stick the supplied Desiccant Bag inside the camera.
4.
Firmly close the camera cover for waterproofing and then slide the Sunshield back to the camera
body.
Note: When properly installed, the rear-side of the Sunshield should be even with the
rear-side of the camera body. Extending the Sunshield in order to shade the lens will
compromise the image quality.
Sunshield
Set Screw
Micro SD Card Slot
9
EZN7221/7260/7360
Advertisement
Table of Contents
