Black / White List - EverFocus Polestar EZN7221 User Manual

7.1.8. Black / White List

Use this page to specify IP addresses that are allowed / denied to access this camera. By default,
any IP address can access the camera.
Note: The Allowed IP addresses only become relevant when the Denied items contain a Network
or Range, and the supervisor wants to allow one or more IP addresses within that excluded
range or network. In such a scenario, the user would enter the excluded range or network for
the Denied items, and enter the exceptions for the Allowed items.
IP Type: Select IPv4 or IPv6 from the drop-down list.

Permission Type: Select Deny to deny the IP addresses configured below from accessing the

camera. The Allow option is only relevant if you've set up at least one Deny item configured
with Network or Range network rule from the Rule drop-down list.
Rule: Select a network rule and then fill in the IP information in the below boxes.

Single: Type a single IP address in the field below.
•
Network: Type the IP address and subnet mask in the field below.
•
Range: Type a range for the IP addresses.
•
: Set up the IP information and click the Create button, the created IP information will be
listed in the Black/White list.
: Highlight an item in the list and then click the Remove button to remove the highlighted
item.
: Highlight an item in the list and set up the IP information in the boxes below the
Black/White list. Click the Apply button to save the settings.
: Click the button to cancel the changes and return to the previous settings.
46
EZN7221/7260/7360