EverFocus Polestar EZN7221 User Manual page 59

or Night mode (black and white images with IR LED on) based on the light sensor's detection
on the light level.
Auto(AGC): Select to let the camera automatically switch to Day mode (color images) or
•
Night mode (black and white images with IR LED on) based on the AGC value of the current
video image.
Night mode without IR LED: Select to keep the camera in Night mode (black and white
•
images with IR LED off), even in daytime.
Auto(Light sensor) mode without IR LED: Select to let the camera automatically switch to
•
Day mode (color images) or Night mode (black and white images with IR LED off) based on
the light sensor's detection on the light level.
Auto(AGC) mode without IR LED: Select to let the camera automatically switch to Day mode
•
(color images) or Night mode (black and white images with IR LED off) based on the AGC
value of the current video image.
Schedule mode without IR LED: Select to let the camera to switch to Day mode or Night
•
mode (IR LED off) based on the day and night schedule settings (see
D/N Level: This function can only be activated if you select Auto(Light sensor) / Auto(Light

sensor) mode without IR LED / Auto(AGC) / Auto(AGC) mode without IR LED mode in the
Day/Night Settings field. Adjust the level (0 - 100 lux) for the camera to switch from Day mode to
Night mode based on the light level detected by the Light Sensor. Click Apply to apply the
changes or Cancel to cancel the changes and return to the previous settings.
【Day Profile / Night Profile】Select Day Profile to configure the following settings for daytime and
select Night Profile to configure the following settings for nighttime. Click the Apply button to save the
settings.
Note:
1. Some settings in the Exposure Settings may be grayed-out. To configure all the settings, select
User Define from the Day Mode / Night Mode drop-down list (see
2. If you enable the Notification over "IR cut filter ON / OFF" function in the Event Management,
the camera will switch Day / Night mode based on the Event Trigger Type setting (see
Event).
53
EZN7221/7260/7360
7.2.4 Schedule).
7.2.2 Profile).
7.3.2