Table of Contents
Advertisement
You can wire the cables from the side of the camera or through the wall.
Wire the cables from the side
of the camera
4.
Connect the network, power and other cables of the camera to the related devices.
•
If you want to use the Cable Gland to connect the network cable for waterproofing:
a. Insert the supplied Stopper to the Cable Gland.
Cable Gland
b. Insert a RJ-45 network cable (without the RJ-45 connector on the one end) through the
Screw Cap and Cable Gland.
c.
Crimp the RJ-45 connector onto the network cable. Note that the wires should be placed
into the RJ-45 connector based on the following order (from left to right).
Orange with white stripe
Orange
Green with white stripe
Blue
Blue with white stripe
Green
Brown with white stripe
Brown
d. Connect the RJ-45 network cable to the LAN / PoE Cable. Tightly screw the Cable Gland
and Screw Cap.
5.
Optionally insert a micro SD / SDHC card into the card slot. Please refer to 4.2.2 Inserting a micro
SD Card.
Wire the cables through the wall
Stopper
Cable Gland
Screw Cap
7
EZN7221/7260/7360
Advertisement
Table of Contents
