Table of Contents
Advertisement
b. Type the Username and Password and click OK. The Status column will display Login.
Note:
1. The default user ID is user1 and the default password is 11111111.
2. If you select more than one camera that has the same user ID / password, you will be able
to log in several cameras at once.
Right click the column to configure the setting. Click Apply Changes
c.
save the settings.
Note:
1. Most networks uses DHCP to assign IP address, if you are unsure of your network settings,
please consult your network administrators for configuration details.
2. If you want to set up PPPoE, please refer to
To set up a static IP:
By default, EverFocus' IP cameras are set up with DHCP. To change the IP setting to static IP, select Static
IP from IP Type drop‐down list and set up the desired IP Address, for example, 192.168.31.67.
Please also set up the Subnet Mask and Gateway. Click the Apply Changes button to apply and save the
settings.
7.1.1
Network.
3
2
12
EZN7221/7260/7360
button to apply and
1
Advertisement
Table of Contents
