Table of Contents
Advertisement
4. Record
Click the Record button to start / stop recording the current video stream. By default, this icon is
only for one-minute video recording and the recordings will be saved at C:\EverFocus\. To change
the recording time, see File Size in
Storage. To record long-period recordings, please set up a recording schedule (see Schedule
Settings in
7.3.2.
Event). To change the source video stream, use the Video Stream drop-down list
on the Live View Window. To change the recording format, see Recording and Snapshot Settings in
7.1.3
Storage.
Note: For Microsoft IE10 and above users, some settings have to be complete to enable this
function (see B. Snapshot/Record error message in
5. Audio / Microphone
Click the Audio and Microphone buttons to switch the sound on / off for the speakers and
microphones respectively (if such external devices have been connected to the camera directly or
via the network). To activate the Audio function, the Enable Audio must be selected. See Audio
Settings in
7.2.1 Streaming and
I/O, therefore, TRS microphones / speakers with a (built-in) amplifier and external power supply are
required.
6. Setting
Click the Setting button to enter the Settings page (see
7. Wizard
Click the Wizard button to enter the Setup Wizard.
7.1.3 Storage.
To change the location, see Record to PC in
10.
Audio. Note that the camera provides the TRS line-in / out terminal
18
Troubleshooting).
7.
Settings).
EZN7221/7260/7360
7.1.3
Advertisement
Table of Contents
