Sound Pressure; Vibration - Toro 07385H Operator's Manual

•
Be aware that the stability and control of the machine
are reduced when the load in the cargo box is poorly
distributed.
•
Carrying oversized loads in the cargo box changes the
stability of the machine.
•
The steering, braking , and stability of the machine are
affected when carrying a load where the weight of the
material cannot be bound to the machine such as the
liquid in a large tank.
WARNING
The weight of the box may be heavy. Hands or
other body parts could be crushed.
– Keep hands and other body parts clear when
lowering the box.
– Do not dump materials on bystanders.
•
Never dump a loaded cargo box while the machine is
sideways on a hill. The change in weight distribution may
cause the machine to overturn.
•
When operating with a heavy load in the cargo box,
reduce your speed and allow for sufficient braking
distance. Do not suddenly apply the brakes. Use extra
caution on slopes.
•
Be aware that heavy loads increase your stopping distance
and reduce your ability to turn quickly without tipping
over.
•
The rear cargo space is intended for load carrying
purposes only, not for passengers.
•
Never overload your machine. The name plate (located
under the middle of the dash) shows the load limits for
the machine. Never overfill attachments or exceed the
machine maximum gross vehicle weight (GVW).

Sound Pressure

This unit has a sound pressure level at the operator's ear of 82
dBA, which includes an Uncertainty Value (K) of 1 dBA.
The sound pressure level was determined according to the
procedures outlined in EN ISO 11201.

Vibration

Hand-Arm
•
Measured vibration level for right hand = 0.41 m/s
•
Measured vibration level for left hand = 0.2 m/s
•
Uncertainty Value (K) = 0.5 m/s
Measured values were determined according to the procedures
outlined in EN 1032.
2
2
2
Whole Body
•
Measured vibration level = 0.3 m/s
•
Uncertainty Value (K) = 0.5 m/s
Measured values were determined according to the procedures
outlined in EN 1032.
6
2
2