Sound Pressure; Vibration - Toro 07383 Operator's Manual

the machine. Never overfill attachments or exceed the
machine maximum gross vehicle weight (GVW).
Maintenance
WARNING
Hydraulic fluid escaping under pressure can have
sufficient force to penetrate skin and do serious
damage. If fluid is injected into the skin it must be
surgically removed within a few hours by a doctor
familiar with this form of injury or gangrene may
result.
Keep your body and hands away from pinhole leaks
or nozzles that eject hydraulic fluid under high
pressure. Use paper or cardboard, not hands, to
search for leaks.
•
Before servicing or making adjustments to the machine,
stop the engine, set the parking brake, and remove the
key from the ignition to prevent accidental starting of
the engine.
•
Never work under a raised bed without placing the bed
safety support on the fully extended cylinder rod.
•
Make sure that all hydraulic-line connectors are tight, and
that all hydraulic hoses and lines are in good condition
before applying pressure to the system.
•
Before disconnecting or performing any work on the
hydraulic system, all pressure in the system must be
relieved by stopping the engine, cycling the dump valve
from raise to lower and/or lowering box and attachments.
Place the remote hydraulics lever in the float position.
If the box must be in raised position, secure it with the
safety support.
•
To make sure that the entire machine is in good condition,
keep all nuts, bolts, and screws properly tightened.
•
To reduce the potential fire hazard, keep the engine area
free of excessive grease, grass, leaves, and accumulation
of dirt.
•
If the engine must be running to perform a maintenance
adjustment, keep hands, feet, clothing, and any parts of
the body away from the engine and any moving parts.
Keep everyone away.
•
Do not overspeed the engine by changing the governor
settings. The maximum engine speed is 3650 RPM. To
ensure safety and accuracy, have an Authorized Toro
Distributor check the maximum engine speed with a
tachometer.
•
If major repairs are ever needed or assistance is required,
contact an Authorized Toro Distributor.
•
To be sure of optimum performance and safety,
always purchase genuine Toro replacement parts and
accessories. Replacement parts and accessories made by
other manufacturers could be dangerous. Altering this
vehicle in any manner may affect the vehicle's operation,
performance, durability or its use may result in injury or
death. Such use could void the product warranty of The
Toro® Company.

Sound Pressure

This unit has a sound pressure level at the operator's ear of 75
dBA, which includes an Uncertainty Value (K) of 1 dBA.
The sound pressure level was determined according to the
procedures outlined in EN ISO 11201.

Vibration

Hand-Arm
•
Measured vibration level for right hand = 0.34 m/s
•
Measured vibration level for left hand = 0.43 m/s
•
Uncertainty Value (K) = 0.5 m/s
Measured values were determined according to the procedures
outlined in EN 1032.
Whole Body
•
Measured vibration level = 0.33 m/s
•
Uncertainty Value (K) = 0.5 m/s
Measured values were determined according to the procedures
outlined in EN 1032.
7
2
2
2
2
2